1 ch HD SD Encoder with Mux

Single Channel HD/SD H.264 MPEG2 Encoder

——     YUK2000-1     ——

1 ch HD SD Encoder with Mux

    Overview                                                                                                                                                                                   


YUK2000-1 HD/SD encoder is a single channel broadcast level professional H.264 MPEG-2 encoder. It supports one channel HD SD-SDI HDMI CVBS audio signal input, 2 channel ASI input, 2 channel ASI output and 1 channel Gigabit IP input output. It’s widely used for High Definition and Standard Definition simultaneous broadcasting for TV channel.

                                                                                                                                                                  

    Product Features                                                                                                                                                                       


l  Support 1 channel video input, optional HD/SD-SDI HDMI CVBS input

l  Support 1 channel audio input: HD/SD-SDI embedded audio, HDMI embedded audio, 1 ch analog stereo, 1 ch AES/EBU

l  Support encoding format H.264 MPEG-2

l  Support VBR and CBR encoding mode

l  Output multicast unicast IP stream after multiplexing, IP transport protocol UDP RTP

l  2 ASI input, 2 ASI independent output

l  Support mux re-mux and demux function

l  Support HD program input and SD program output (support down conversion function)

l  Support multiple resolutions of 1080I/720P/576I/480I

l  Support PID remapping, PCR correction

l  Support low latency encoding

l  Support LCD display/key operation

l  Plug-in two power supplies, support buzzer alarm


    Specification                                                                                                                                                                             

         

  Basic Information  

  Video Encoding  

Input: 1×HD/SD-SDI(BNC), 1×HDMI, 1xCVBS,2×ASI(BNC) Encoding format:H.264 MPEG-2
1xanalog Left channel(XLR), 1xanalog Right Channel(XLR), 1xAES/EBUBitrate: 512Kbps-20Mbps
Output: 2×ASI(BNC), 1×Gigabit IP (RJ45) (also can be used as IP input)Bitrate control: VBR CBR optional

Resolution:1080p30/p25/i60/i50 720p60/p50 576I 480I

  Audio Encoding  

GOP structure: IBBP/IBP optional

Encoding format: MPEG1 LayerII AAC


Bitrate: 64/128/256/384Kbps

  TS Over IP  

Sampling frequency: 48/44.1/32KHz

Protocol: UDP RTP

Support volume adjustment

TS over IP output can be turned on and off

Support SDI/HDMI embedded audio

Support unicast, multicast mode


The number of TS packets contained in UDP packets can be adjusted from 1 to 7

  Stream Output  

The IP output protocol is implemented by FPGA hardware. After the transmission link

Support ASI and IP simultaneous output 

is restored, the signal is restored instantly

SDT parameters can be modified


Stream fluctuation can be controlled by turn on or turn off empty packets

  DVB-ASI Serial Data Output  

Support UDP, RTP protocol

Connector: BNC, 75Ω


Data transfer Rate: 270Mb/s

  DVB-ASI Serial Data Input  

Data pattern: Byte

Connector: BNC, 75Ω

Package length: 188, 204 optional

Data pattern: Byte, Burst adaptive

Signal level: 800mV±80mV

Package length : 188, 204 adaptive




  Physical Specifications  


Temperature range: 0~+40°C (operation), -20°C~+70°C (storage)


Power: AC 90~260V, 50Hz/60Hz, redundant two power supplies


Humidity: <85%


Dimension(L×W×H):485×350×44(mm) (19 inches 1U rack)


Net Weight: 6.2KG





Prev:noneNext:none
Copyright © 2019 20210829.All Rights Reserved 京公网安备11011402012846号Rhino Cloud provides enterprise cloud services